Descargar Imprimir esta página

Craftsman 536.889251 Manual Del Usuario página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

The operation ofanysnow thrower can
result i nforeign o bjects b eing thrown
intotheeyes, which canresult inse-
vere eyedamage. Always w ear s afety
glasses oreyeshields w hile operating
thesnow thrower.
Werecommend
standard safety
glasses orawide vision s afety m ask for
over y ourglasses.
,_
WARNING: Read Owner's
Manual before operating
machine. Never direct dis-
charge toward bystanders. Stop the
engine before unclogging discharge
chute or auger housing and before
leaving the machine.
TO STOP YOUR
SNOW THROWER
1. To stop throwing snow, release the
auger drive lever. See Figure 14.
2. To stop the wheels, release the
traction
drive lever.
3. To stop the engine, push the
throttle
control lever to off and pull
out the ignition
key.
Auger Drive Lever
\
TO CONTROL SNOW DISCHARGE
1. Move the electric chute switch to
set the direction (left to right) of the
snow throwing.
2. Push the remote chute lever for-
ward to discharge the snow down.
Pull the remote chute lever back to
discharge the snow high and far.
HOW TO MOVE
FORWARD
AND BACKWARD
1. To move the snow thrower forward,
engage the traction
drive lever
(left hand). As the snow thrower
starts to move forward, push the
shift lever to the desired speed.
Maintain a firm hold on the handles
and guide the snow thrower along
the clearing path. Do not attempt to
push the snow thrower.
2. To move the snow thrower back-
ward, pull the shift lever to the re-
verse position.
TO THROW
SNOW
1. Push down the auger driver lever
(right hand). See Figure 14.
2. Release to stop throwing snow.
Shift Lever
TractionDrive Lever
Remote Chute Lever
Figure 14
F-031068L
14

Publicidad

loading