Descargar Imprimir esta página

Craftsman 536.889251 Manual Del Usuario página 33

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLE
CORRECTION
Difficult starting
CAUSE
Defective spark plug,
Water or dirt in fuel system.
Replace spark plug.
Remove fuel from fuel tank.
Add fresh fuel.
Engine runs erratically
Blocked fuel line, empty gas
Clean fuel line; check fuel
tank, or stale gasoline
supply; add fresh gasoline
Engine stalls
Unit running on CHOKE.
Set choke lever to OFF
position.
Engine runs erratic;
Water or dirt in fuel system.
Remove fuel from fuel tank.
Loss of power
Add fresh fuel.
Electric Grips do not heat;
Blown fuse
Check the fuse. Replace the
Electric
Chute does not
fuse with a 7.5 amp
rotate
automative type fuse. See
the Wiring Harness parts list
page for the location of the
fuse.
Excessive
vibration
Loose parts: damaged
Immediately
stop engine.
impeller
Remove ignition key. Tighten
all fasteners and make all
necessary repairs.
If
vibration continues, take the
unit to a Sears service
center.
Unit fails to propel itself
Traction drive belt loose or
Replace traction drive belt.
damaged.
Incorrect adjustment of
traction drive cable
Worn or damaged friction
wheel.
Auger drive belt loose or
damaged.
Adjust traction drive cable.
Replace friction wheel.
Unit fails to discharge
snow
Adjust auger drive belt;
replace if damaged.
Auger control cable not
Adjust auger control cable.
adjusted correctly.
Shear bolt broken
Replace shear bolt
Discharge chute clogged.
Stop engine immediately
and
disconnect
spark plug wire.
Clean discharge chute and
inside of auger housing.
Foreign object lodged in
auger
Stop engine immediately
and
disconnect
spark plug wire.
Remove object from auger.
F-031068L
33

Publicidad

loading