AUGER
BELT
GUIDE
ADJUSTMENT
1. Remove spark plug wire.
2. Rave someone engage auger drive.
3. Measure the distance between the
belt guide and auger drive belt.
The distance should be 1/8 inch
(3.175 ram). See Figure 40.
4. If adjustment is necessary, loosen
belt guide mounting bolt. Move belt
guide to the correct position. Tight-
en mounting bolt.
5. Reinstall belt cover.
6. Reconnect spark plug wire.
Auger Idler
Pulley
Engaged
Belt Guide
1/8 Inch
(3.175 mm)
Drive Belt
Figure 40
TRACTION
DRIVE
BELT
GUIDE
ADJUSTMENT
1. Remove spark plug wire.
2. Have someone engage the traction
drive.
3. Measure the distance between the
two belt guides and traction
drive
belt. Set the distance for the two
belt guides as shown in Figure 41.
4. If adjustment is necessary, loosen
belt guide mounting bolt. Move belt
guide to the correct position. Tight-
en mounting bolt.
5. Reinstall belt cover.
6. Reconnect spark plug wire.
3/
(4.8 ram)
Belt Guide
Traction
Drive Idler
Pulley
Engaged
1/16 Inch
_
Belt Guide
Traction
Drive Belt
Figure 41
F-031068L
29