Starting Up For The FI Rst Time; Starting Up Your Pc - Medion P2125 D Manual Del Usuario

USA
Starting up for the fi rst time
Starting up for the fi rst time
The operating system and all hardware drivers are pre-installed.
For some programs (e.g. telephone CDs or encyclopedias), it may be
necessary to insert the relevant disc to call up the data stored on it. The
software will prompt you to do this if necessary.
Once you have made all of the connections and screwed on all of the
required connections, you can start up your PC:

Starting up your PC

− Switching on the monitor.
− Switch on the mains switch
switch to 0 to disconnect the power supply.)
− Press the On/Off switch
Your PC will now start and run through various steps.
There should be no bootable disk in the optical drive
as this will prevent the operating system from being
loaded from the hard drive.
The operating system will be loaded from the hard disk drive. The
loading process takes a little longer during the initial setup. Once all the
necessary data has been entered, the operating system will be set up.
The operating system is fully loaded once the Windows® start-up screen
appears.
The initial installation may take a few minutes. Do not
disconnect the PC from the power supply during
initial installation and do not switch it off. This may
adversely affect the installation. Only switch off the PC
when installation has been successfully completed
and the start screen appears.
− Follow the instructions on the screen. Step-by-step instructions will
guide you through the process to be followed.
26
www.medionusa.com
by moving it to the setting I. (Set this
5
once to switch on your PC.
1
AFTER SALES SUPPORT
+1 866 633 4660
USA