Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Open the package case and take out the Meter. Check the following items carefully to see
any missing or damaged part:
Item
1
2
3
4
5
In the event you find any missing or damage, please contact your dealer immediately.
This Meter complies with the standards IEC61010-031, IEC61326, : in pollution degree 2
Use the Meter only as specified in this operating manual, otherwise the protection provided
by the Meter may be impaired.
In this manual, a Warning identifies conditions and actions that pose hazards to the user, or
may damage the Meter or the equipment under test.
A Note identifies the information that user should pay attention to.
International electrical symbols used on the Meter and in this Operating Manual are explained
on page 13.
- Before using the Meter inspect the case. Do not use the Meter if it is damaged or the case
(or part of the case) is removed. Look for cracks or missing plastic.
- Do not use or store the Meter in an environment of high temperature, humidity, explosive,
inflammable and strong magnetic field. The performance of the Meter may deteriorate after
dampened.
12
UNPACKING INSPECTION
Description
English Operating Manual
Reflecting Tape
USB Interface Cable (Code 51265 only)
Software (Code 51265 only)
1.5V Battery (LR6)
SAFETY INFORMATION
RULES FOR SAFE OPERATION
Qty
1 piece
10 pieces
1piece
1 piece
4 pieces
Publicidad
Tabla de contenido
