Functional Buttons - Ega Master EGATRONIK Manual De Instrucciones

Below table indicated for information about the functional button operations.
Button
ON/OFF
R/C
M/M/A
A. USB setupPress
R/C button to select USB feature after turning on the Meter. Then press M/M/Abutton to
setup 0 or 1. 0 means turn the USB off. 1 means enable the USB feature.
B. LED setupPress
R/C button to select LED feature after turning on the Meter. Then press M/M/Abutton to
setup 0 or 1. 0 means turn the LED laser off. 1 means enable the LEDlaser feature.
C. SR sampling rate setup
Press R/C button to select SR feature after turning on the Meter. Then press M/M/Abutton to
setup 005 ~ 255. Press and hold M/M/A button to access quick setting.
D. AOFF setup
Press R/C button to select AOFF feature after turning on the Meter. Then pressM/M/A button
to setup 0 or 1. 0 is disable auto power off feature. 1 means enableauto power off feature,After
enable auto power off feature, the Meter will be auto power off after ten minutes if you do not
press any button for 10 minutes. You could press ON/OFF button toturn on the Meter again
after the Meter is off.
E. CLK setup
Press R/C button to select CLK feature after turning on the Meter. Then press M/M/Abutton
to setup 0 or 1. 0 is hours and minutes format. 1 is minutes and seconds format.
14

FUNCTIONAL BUTTONS

Operation Performed
SETUP