Buchi Rotavapor R-300 Manual De Instrucciones página 88

10 | Anexo
88/102
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of condenser/secondary
cold trap. Placed on receiving flask. Meant to be used with the Interface
I-300/I-300 Pro.
Set earthquake fastener. Lug for backside
To fasten device on lab bench.
Vacuum connection. Incl. drain valve, hose barb ∅8mm, KS35/20
Connection piece for aeration of the system, placed between
condenser and receiving flask.
Vacuum valve. Magnetic valve, 24V/4W, Mini-DIN, 1.5m
Flow valve without flask, meant to be used with a centralized vacuum
source or an unregulated vacuum pump. Meant to be used with the
Interface I-300/I-300 Pro.
Vapor temperature sensor. Incl. cap nut, seal GL14
Measures the vapor temperature inside the system. Meant to be used
with the Interface I-300/I-300 Pro.
Water jet pump. Plastic
Used when tap water is used to generate vacuum.
Water jet pump, B-764. Magnetic valve, FFKM, 24V
Used when tap water is used to generate vacuum. Not inclusive:
Cooling water valve. Meant to be used with a vacuum Controller/inter-
face.
Water jet pump, B-767. Magnetic valve (2pcs), FFKM, 24V
Used when tap water is used to generate vacuum. Inclusive: Cooling
water valve. Meant to be used with a vacuum Controller/interface.
Water regulation nozzle. Flow regulator, incl. hose clamp, sieve
Used when tap water is used to generate vacuum. Reduces water
consumption.
BÜCHI Labortechnik AG
Manual de instrucciones Rotavapor® R-300
11060954
11062386
001006
11060706
11060707
002913
031358
031357
011606