SEVERIN MW 9675 Instrucciones De Uso página 18

∙ If, during operation, the door is opened or the
is evenly distributed), the timer and programme functions are automatically suspended. The programme will automatically resume only
after the door is closed again and the
∙ Press twice to interrupt the programme.
∙ A 5 beep signal indicates that the pre-programmed cooking time has elapsed; at the same time, the interior lighting switches off.
∙ Open the door and remove the container with the food.
∙ In order to achieve an even heat distribution through the food, the container should be set aside for several minutes.
Note: The following steps are used for setting the cooking time:
0 – 1 minute : 5-second steps
1 – 5 minutes : 10-second steps
5 – 10 minutes : 30-second steps
10 – 30 minutes : 1-minute steps
30 – 95 minutes : 5-minute steps
Clock :
Once the unit has been connected to the power supply, the display shows '0:00' and an acoustic signal is heard.
1. Press once. The hour digits start fl ashing in the display.
2. Turn the rotary control to set the correct hour.
3. Press . The minute digits start fl ashing.
4. Turn the rotary control to set the correct minutes.
5. Press to fi nish setting the time. The symbol ' : ' fl ashes and the correct time is shown.
The time setting process can be cancelled by pressing the
The clock must be set when the appliance is connected for the fi rst time, and also if a power failure has reset the clock.
Kitchen timer :
1. Press twice. The display shows „00:00".
2. Turn the rotary control to set the desired time.
3. Press to activate the kitchen timer.
4. A 5-beep signal indicates that the pre-set time has elapsed and the clock reverts to the normal display.
The maximum pre-programmable time is 95 minutes.
The microwave function
To programme the unit for cooking, the correct mode (microwave), the required power setting and the cooking time must be selected,
before the programme sequence can be started. The power setting is selected by repeatedly pressing
and then using the rotary control. The cooking time can be pre-set to a maximum of 95 minutes.
Power (P)
1 mal 800 W
2 mal 640 W
3 mal 400 W
4 mal 240 W
5 mal 80 W
Example: to programme the microwave function for a cooking time of 5 minutes at 50 % power.
1. Press 3 times, or press
P 50.
2. Press to confi rm.
3. Turn the rotary control, until the display shows 5:00.
4. Press to start the programme.
Quick-programming :
The most commonly used microwave time-settings can be called up simply by pressing
18
key is pressed (e.g. to stir or to turn the food in order to ensure that the temperature
key is pressed.
:
Power settings
Display
P100 (100 %)
P 80 (80 %)
P 50 (50 %)
P 30 (30 %)
P 10 (10 %)
once and then use the rotary control to select the desired power setting. The display shows
key.
Type
High Heating up liquids, cooking
Medium high Defrosting and heating up deep-frozen dishes
Medium Cooking delicate food
Defrosting Defrosting food
Defrosting Defrosting sensitive food
, or by pressing
. With this function, the microwave power
once