Starting / Stopping The Engine - Stihl SP 200 Manual De Instrucciones

Starting / Stopping
the Engine
7
3
2
1
Controls
Throttle trigger interlock (1), throttle
trigger (2) and slide control (3).
Positions of slide control
STOP-O (4) – engine off – ignition off
# – run (5) – engine is running or can be
started
START (6) –ignition is switched on – the
engine can be started
SP 200
Symbol on slide control
h (7) – stop sign and arrow – to stop
4
engine, move slide control in direction of
arrow on stop sign (h) to STOP-O.
5
Starting
6
: Hold down the trigger interlock and
squeeze the throttle trigger.
: Keep both levers in that position.
: Move the slide control to START
position and hold it there.
: Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the
starting-throttle position.
English / USA
9
8
: Set the choke knob (8):
For cold start to g
For warm start to e
Also use this setting if engine has
been running but is still cold.
: Press the fuel pump bulb (9) at least
five times, even if the bulb is still
filled with fuel.
21