Turn
the
camera on. Confi rm
that
the
"S"
disappears
from the LCD panel
and turn the lock-release lever to open
the cartridge chamber
cover.
Note:
Do not attempt to open the
car-
tridge chamber cover while the film is
still loaded.
Insert
a new cartridge as
shown,
and
close the cartridge chamber cover until
it clicks shut. The film will begin
ad-
vancing. Fi lm speed is set automati-
cally.
Note:
The VEl should show
"e"
before
loading. Do not load a film cartridge
showing
"t
" or
".
". (The VEl automati
-
cally changes to
"X
".)
PREPARATIONS
Turn the camera on again. The
LCD
II
panel should display "S" and the
frame count. (If the film is fully
or
par-
tially exposed,
"f"
will blink on the LCD
panel.)
15