Sony Cyber-shot DSC-F505 Manual De Instrucciones página 30

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the supplied accessories (PC serial cable)
You can send image data from your camera to an IBM PC/AT compatible PC (via the
serial port), using the supplied PC serial cable and Sony PictureGear 3.2 Lite.
See page 72 for the operating environment of Sony PictureGear 3.2 Lite.
Personal computer
to the serial port
1 Install the supplied application software, Sony PictureGear 3.2
Lite, into your personal computer.
For details, refer to the instruction manual of the Sony PictureGear 3.2 Lite.
(page 68)
2 Connect one end of the PC serial cable to the serial jack and the
other end to the serial port on your personal computer as
illustrated.
3 Turn on the power of your camera, and make sure if the PC serial
cable is connected to the serial jack on your camera. Set the MODE
selector to PLAY.
"PC MODE SERIAL" appears on the LCD screen, and your camera turns to
standby for communication.
4 Operate the personal computer to receive and use image file from
your camera.
For details on the operation of your personal computer, refer to the instruction
manual of your personal computer and Sony PictureGear 3.2 Lite.
30-GB
PC serial cable (supplied)
Digital still camera
to the serial jack

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido