Vermeiren Albatros Manual De Instrucciones página 17

klick
L
3. WARNING: Risk of injury - Make sure that
the safety spindle is correctly inserted.
Fix the pole in place by pushing the safety spindle at
the end of the pole in with the pushbutton depressed
until its other end clearly protrudes. Release the
pushbutton on the safety spindle and check that it
cannot be pulled out.
1
2
2
2
1
Page 15
The standing
2.a
safety (traction
clicks audibly into place
once the pole is put in its
final position.
Remove the cantilever arm
4.
from the top end of the
pole (2). This is possible
by pulling on the pen (1).
Remove the
5.
gently by pulling out of the
black clip (1).
Attach the actuator on the
6.
cantilever arm
locking pin (2). Take care
that the actuator
positioned very
between the cantilever
arm.
EN
Albatros
2010-12
position
screw)
actuator
by the
is
well