A Blank (Silent) File Is Created When You Record; Noise Is Present In The Recorded Sound - Edirol UA-1X Manual Del Usuario

fig.winmacac
• Try increasing the memory
You can increase the processing power of your computer by adding more
memory. For details on how to install more memory, refer to the operation
manual for your computer.
fig.winmacac
• Does your computer meet the USB specifications?
The audio may be interrupted if you are using a computer that does not
electrically meet the USB specifications. In such cases, you may be able to solve
the problem by connecting a USB hub that contains a power supply.

A blank (silent) file is created when you record

fig.win
• Try setting the bit rate to "16bit."
If you are using Windows98 Second Edition, and your recording software is set
to a bit rate of 8 bits, a blank file may be created, so that you may not be able to
record effectively. If this occurs, you will be able to record correctly by setting the
bit rate to "16 bit."

Noise is present in the recorded sound

Depending on the virtual memory setting or network-related settings, noise
may occur.
Please make the following settings before use.
• In Chooser of the Apple menu, set AppleTalk to "Inactive."
(This setting is not changed as a result of turning off AppleTalk, as requested
by OMS when sequencer software is started up. You must change the setting
yourself using the "Chooser.")
• In the "Memory" Control Panel, set Virtual Memory to "Off."
• Depending on the way in which you connect to the Internet, use the UA-1X with
the following settings.
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
If you connect to the Internet via the internal modem port, or are not
connected to the Internet
In the "TCP/IP" Control Panel, set "Connect via" to "PPP."
After you have made the settings, restart your Macintosh.
* Do not use software that accesses the network (such as a Web browser) at the same
• In the SimpleSound application that is included with MacOS, noise will
be heard in the sound if it is played back immediately after being digitally
recorded. Save the sound first, then try playing it back.
• Update the Mac OS.
The Mac OS can be downloaded from the Apple web site.
time that you are using sequencer software or audio editing software.
Troubleshooting
117