Edirol UA-1X Manual Del Usuario página 21

2
You can raise or lower the slider to adjust the volume
of the UA-1X. The following items can be set.
USB Audio
(Speaker)
CD Player
Wave
SW Synth
* 1 Depending on your Windows version, this may be displayed as
an "analog connector."
* 2 If the playback of the CD does not change when you adjust this
volume, change the WAVE volume.
Adjust the volume of the analog outputs
(line output and headphone output).
The digital output will not change (*1).
Adjust the "CD Music" volume for the
CD-ROM drive of your computer (*2).
Adjust the volume that is output from
the audio output device "USB Audio
Device." The digital output and analog
output will change.
Adjust the volume of the software
synthesizer built into Windows.
Connections and Driver Installation (Windows)
By turning up the volume
control you can output the
sound from your computer
through the UA-1X at the
best audio quality.
If Mute is checked, or if the
slider is in the lowest position,
no sound will be output from
the UA-1X.
If the UA-1X is connected,
Windows will not output
sound from your computer's
speakers. Since the sound from
your computer will be output
from the UA-1X's headphone
jack or line output jacks rather
than from your computer's
speakers, you will need to
connect headphones or
monitor speakers to the
UA-1X. Alternatively, you
can connect the UA-1X's line
output jacks to the LINE input
jacks of your computer.
21