Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment - RIDGID 122 Manual De Instrucciones

122/122XL Copper Cutting and Prep Machines
• Keep fingers and hands away from the rotating
rollers, reamer, wire brushes, deburring disk and
tube. This reduces the risk of entanglement and cutting
injuries.
• Do not cut visibly bent tubing or tubing with fit-
tings attached. Reduces the risk of excessive vibra-
tion and loss of control of the machine and/or tubing.
• Only use the machines to cut, clean and deburr
copper or stainless steel tubing as directed in
this manual. Do not use for other purposes or modi-
fy. Other uses or modifying this machine for other
applications may increase the risk of serious injury.
• Read and understand the instructions and warn-
ings for all equipment and material being used
before operating the machines. Failure to follow all
instructions and warnings may result in property dam-
age or serious personal injury.
The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when
required.
If you have any question concerning this RIDGID
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
– Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.

Specifications

Parameter
Capacity
Copper Tubes and Fittings
Stainless Steel Tubes
Cutter Wheel
Reamer
Roller Speed
Motor Type
Motor Rating 100V
Motor Rating 115V
Motor Rating 230V
Switch
Weight
Dimensions (HxLxW)
4
Description, Specifications and

Standard Equipment

Description
The RIDGID
Prep Machines are designed to cut, clean and deburr cop-
per tubing and fittings (Types K, L and M). These can also
be used to cut and deburr stainless steel tubing with a
maximum wall thickness of .065" (1.65 mm) with a sepa-
rate cutter wheel.
Cutting is performed by turning the tubing with motor-driv-
en rollers while a cutter wheel is manually actuated by a
rack and pinion. An adjustable cutting handle accommo-
dates different diameter tubes and a scale is included for
tube measurement. Reamer removes burrs from the inside
of the tubing while the brush cleans the external surface in
preparation for joining. The machine can also clean the
inside of fittings using individually sized brushes that are
attached to the quick-change adapter. Deburring disk
cleans burrs from the outside surface of the tubing.
The RIDGID
Prep Machines are not designed for use with pipe.
® product:
Standard Equipment
The 122 and 122XL Copper Cutting and Prep Machines
come with the following items:
122
1 / " to 2" (12 mm to 54 mm)
2
ASTM B88 Type K, L & M
Max Wall Thickness 0.065" (1.65 mm)
Model 2191 HD (STD 115V)
Model 122 SS (STD, 100V, 230V)
Single Flute Cone,
RH 1 / " to 2" (12 mm to 54 mm)
2
450 rpm
Induction Motor
100V, 50/60 Hz, 5.5/6.0 Amp
115V, 60 Hz, 1/3 HP, 6 Amp
230/240V, 50 Hz, 360 W, 1.8 Amp
Toggle On/Off
50 lb (22,7 kg)
14.6" x 16.8" x 15.1"
(370 x 427 x 383 mm)
® Model 122 and 122XL Copper Cutting and
® Model 122 and 122XL Copper Cutting and
• O. D. Cleaning Brush
• Cone Reamer
• O. D. Deburring Disk (122XL Only)
• Fitting Brush Storage Kit (122 Only)
• Operator's Manual Pack
122XL
1 / " to 4" (12 mm to 108 mm)
2
ASTM B88 Type K, L & M
Max Wall Thickness 0.065" (1.65 mm)
Model 122 SS
Single Flute Cone,
RH 1 / " to 2" (12 mm to 54 mm)
2
300 rpm
Induction Motor
115V, 60 Hz, 1/3 HP, 6 Amp
230/240V, 50 Hz, 360 W, 1.8 Amp
Toggle On/Off
72 lb (32,7 kg)
16.5" x 17.1" x 15.0"
(419 x 434 x 381 mm)