Assembly; To Assemble The Guide Bar And Saw Chain - Husqvarna T536LiXP Manual Del Usuario

has been incorrectly sharpened increases the risk of
accidents.
• Keep the correct depth gauge setting! Follow our
instructions and use the recommended depth gauge
clearance. Too large a clearance increases the risk
of kickback.
• Make sure that the saw chain has the correct
tension! If the saw chain is not tight against the guide
bar, the risk for it to come loose increases. This
To assemble the guide bar and saw
chain
WARNING: Always remove the battery
before you assemble or do maintenance on
the product.
1. Disengage the chain brake.
12
leads to increased wear on the guide bar, saw chain
and drive sprocket.
• Do maintenance on the cutting equipment regularly
and keep it correctly lubricated. The risk of wear on
the guide bar, saw chain and drive sprocket
increases if the saw chain is not correctly lubricated.

Assembly

2. Remove the bar nut, the drive sprocket cover and
the transportation ring (A).
A
488 - 002 - 01.03.2018