Symbols On The Product - Husqvarna T536LiXP Manual Del Usuario

9. Rope eyelet
10. Fan housing
11. Chain oil tank
12. Front handle
13. Power trigger lockout
14. Power trigger
15. Spiked bumper
16. Bar tip sprocket
17. Saw chain
18. Guide bar
19. Chain catcher
20. Chain tensioning screw
21. Drive sprocket cover
22. Guide bar cover
23. Charging LED
24. Warning indicator
25. Power cord
26. Battery charger
27. Combination wrench
28. Button, battery status
29. Battery status
30. Warning indicator
31. Battery release button
32. Battery
33. Operator's manual

Symbols on the product

Risk of serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
understand the instructions before operation
of the product.
Wear approved protective helmet, hearing
and eye protection.
Use appropriate protections for foot-leg and
hand-arm.
Use both hands when you operate the
product.
Never operate the product holding it with
one hand.
488 - 002 - 01.03.2018
Never let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar nose or guide bar tip touches an
object. This causes the guide bar to be
thrown in the direction of the operator. Risk
of serious injury or death.
This saw should only be used by persons
who are specially trained in tree
maintenance work. See operator's manual!
The direction in which the saw chain rotates
and maximum length of the guide bar.
L-Max
356 mm / 14"
Chain brake, engaged (right). Chain brake,
disengaged (left).
Chain oil fill.
Direct current.
Recommended cutting equipment in this
example: Bar length 14 inches (356 mm),
max. nose radius 9 Teeth, chain type
Husqvarna H38.
Measured maximum kickback value without
XX
triggering the brake, for the bar and chain
combination on the label.
Measured maximum kickback value with
XX
brake for the bar and chain combination on
the label.
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling station for
electrical and electronic equipment.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for certain markets.
The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
3