LEM SATURN 100 plus Instrucciones De Uso página 62

Information for the tester
Permissible overload: max. U
rms
Electrical safety is given during and functional safety after overload.
Protective Wire Check ( )
Voltage range: 50 - 250 V AC, between contact electrode „
PE-wire
Frequency range: 15.3 Hz - 457 Hz
Internal resistance: approx. 1.6 MΩ
Test for continuity: by touching the START-button in the yellow marked
measuring functions [FI, R , (L-PE)]
A
Permissible overload: U = 600 V AC
rms
Electrical safety is given during and functional safety after overload.
Phase Connection Test ( )
Nominal voltage: 20 - 250 V AC
Frequency range: 46 - 65 Hz
Internal resistance: approx. 470 kΩ
Permissible overload: U = 600 V AC
rms
Electrical safety is given during and functional safety after overload.
Display: if L is connected to the higher potential
1
if L is connected to the higher potential
2
Versions CH/GB: if L is connected to the higher potential
1
if L is connected to the higher potential
2
= 600 V AC (measurement is not started)
60
"and