Temper KOBAN KCER-01MF Manual Del Usuario página 105

KCER-01MF
Multifunction Tester
Figure 21 Initial screen of the Phase Sequence Measurement
Figure 22 Phase Sequence – Test lead connection
1. Turn the rotary switch to the VOLTAGE position
2. Press F1 to make symbol is displayed
3. Connect the test leads L1, L2, L3 as shown on the Figure 22
4. When the instrument is energized the sequence will be displayed automatically
Figure 23 Phase Sequence screen -when connected in clockwise direction.
32
www.grupotemper.com