Temper KOBAN KCER-01MF Manual Del Usuario página 98

KCER-01MF
Multifunction Tester
5.2.4 Using the L- N Line Impedance Measurement
Figure 10 L-N Line – Standby screen
1. Turn the rotary switch to the LOOP / Psc position
2. Press F1 button to change from L - PE to L - N
3. Connect the test leads as shown in Figure 12
4. If voltage of the L- PE on the lower left appears,the unit is ready to TEST
5. Press the TEST button when ready
Figure 11 L-N Line Impedance – When measuring
25
www.grupotemper.com