Usb Device - Temper KOBAN KCER-01MF Manual Del Usuario

KCER-01MF
Multifunction Tester
11. Software
11.1 PC software
Open a file.exe from the included software CD and install the program on your PC. You can use the included
software to transfer stored measurement data via USB to your PC or record the data in real time via Bluetooth
adapter in the software. With a USB connection, the device is found as a removable storage medium in
Windows systems, for which no driver installation is necessary. To use a Bluetooth connection you may need
a Bluetooth-Adapter for your PC, which is commercially available. Most modern laptops already have built-in
Bluetooth interface for data communication with mobile devices. After setting up the data connection to the
Bluetooth device a virtual COM port interface will be assigned, which you can select in the software.
11.2 App for mobile phones
Download the app "Meterbox iMIT" for free from the App Store or Play Store. Open the application and start a
Bluetooth data connection. Please ensure that on both devices, the installation safety tester and your mobile
phone, the Bluetooth interface is enabled and active. In the application for mobile phones, the data can be
transferred from the meter by pressing a button in the measured value table and can be forwarded directly by
e-mail.

12- USB Device

The instrument in the shutdown or startup state, connected to PC via USB, data communication.
Enter the USB connection as shown in Figure 11.1.1:
At the PC end of the mobile storage device can find two drive, MEMORY drive letter as shown in Figure 11.2.1,
SD card is inserted if SD card drive, double-click to open, otherwise prompt: please insert disk.
54
www.grupotemper.com