Filter System; Error Codes - Danby DDW1805EWP Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE & MAINTENANCE

FILTER SYSTEM

The fi lter system removes food particles from
the wash water and traps them. It is highly
recommended to empty and clean the fi lters after
every wash cycle.
To clean the fi lter system:
1. Turn off the dishwasher. Turn the fi lter and lift
upwards to remove the fi lter system from the
appliance.
2. Rotate the fi lter insert counterclockwise to
unfasten and then detach the fi lter insert.
3. Rinse and clean the fi lters with water and
replace them inside the appliance.
SPRAY ARM
The spray arms should be periodically removed and
cleaned to remove any hard water build up.
To remove the upper spray arm hold the nut in the
center and rotate the spray arm counterclockwise.
To remove the lower spray arm gently pull it
upward.

ERROR CODES

The rapid wash indicator is fl ashing
• Water intake is restricted or water pressure is
too low.
The rapid wash and 90 Min indicator are fl ashing
• Malfunction of heating element
The normal wash indicator is fl ashing
• Water overfl ow
If the appliance displays any error code, a power
reset may resolve the issue. Unplug the appliance,
wait approximately 5 minutes and then plug the unit
back in.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido