The Evencareg2 Test Strip - Medline EvenCare G2 Manual De Instrucciones

EvenCareG
The EvenCareG2 Blood Glucose Test Strip
Contact Points
Insert this end to the test
strip port on the meter.
The EvenCare G2 Test Strips are glucose specific, biosensor-based
test strips that require very little blood sample to quickly test glucose in
fresh capillary whole blood. The test results are plasma-calibrated for
easy comparison to lab results, however results may be 10% to 15%
higher than results obtained from whole-blood referenced blood glucose
assays. The test strip is also equipped with under-fill detection to alert you
when there is not enough blood to perform a test, so you can be assured
that every reading you get is an accurate and meaningful result.
IMPORTANT:
• Immediately close the vial cap of the test strip bottle tightly after
each use. Keep the unused test strips in its original bottle.
• DO NOT leave any test strips outside the bottle while not in use.
• DO NOT reuse test strips.Test strips are for single use only.
• Carefully discard used test strips and lancets in proper
waste containers.
10
Understanding Your New Blood Glucose System
Sampling End
Apply blood or control
solution here.