Medline EvenCare G2 Manual De Instrucciones página 15

Step 8 - Set Minute:
The current minutes will flash. If the voice function
is on, the meter will say, "Set Minutes." Press
▲or▼ to select the correct minutes. Press Enter (
) to confirm your choice and finish setting the
clock.
NOTE:
• Anytime during set up, inserting a EvenCare G2 Test Strip will
begin testing. Any changes made so far are stored.
• You may need to reset time after changing batteries.
After date and time has been set, the meter will announce the date
and time if the voice feature is on. Begin testing by inserting an
EvenCare G2 Blood Glucose Test Strip (see page 30, Testing Your
Blood Glucose), or press and hold Enter (
see the next section on how to set up the alarm feature on your meter.
Setting Up Your New System
PM
mem
PM
mo /dL
PM
mem
PM
mo /dL
ctl
PM
) to turn off the meter, or
EvenCareG
PM
mem
mg/dL
DAY
AVG
15
mem