Setting The Alarms - Medline EvenCare G2 Manual De Instrucciones

EvenCareG
mem

Setting the Alarms

You can set up to three alarms on the EvenCare G2 Meter. You must
set the clock before you can set the alarms. When an alarm sounds,
mg/dL
the meter will turn on, and a melody will sound for 30 seconds.
DAY
AVG
Pressing Enter (
You can set up one or all three alarms.
You will need:
√ Your EvenCare G2 Meter
Step 1:
Press and hold Enter (
Step 2:
mo /dL
ctl
Press Enter (
PM
mem
Step 3:
Press ▲or▼ until
the meter will say, "Set testing Alarm." Press Enter (
alarm setting.
PM
mem
Step 4:
The display screen will indicate alarm 1 status
(the default is OFF). You can turn it on or off by
pressing ▲or▼
PM
16
Setting Up Your New System
mem
mg/dL
DAY
AVG
) or inserting a test strip will silence the alarm.
) to turn on the meter.
code
mo /dL
ctl
) to enter setup screen.
PM
mem
starts to flash. If the voice function is on,
ctl
mem
mmol/dL
DAY
AVG
PM
AM
PM
PM
mem
mg /dL
DAY
AVG
mem
mg /dL
PM
code
PM
mem
PM
mem
mg /dL
DAY
AVG
mem
mg /dL
PM
mem
) to enter
PM
PM
mem
mem
mem