Display - Pioneer DVJ-X1 Manual De Instrucciones

Before Operating (Names and Functions of Parts)

Display

1
29 28 27 26 25 24 23 22
1. Title number (TITLE 00-99)
Indicates the DVD title number.
During MP3 playback, displays folder number.
Not displayed during CD playback.
2. Chapter number (CHP 000-999)
Indicates the DVD chapter number.
During CD/MP3 playback, "CHP" does not appear.
3. Track number (TRACK 00-99/000-999 (MP3))
Indicates CD or MP3 track number.
"TRACK" is not displayed during DVD playback.
4. Prohibited indicator ( )
Some DVD discs or players do not support certain functions or op-
erations; if an effort is made to perform such operations, this indica-
tor appears for about 2 seconds.
5. Angle indicator ( )
During DVD playback, this mark appears to indicate a scene with
variable angle.
6. Auto cue (A.CUE) indicator
Lights when auto cue is ON. Does not light during NORMAL mode.
7. Remaining time (REMAIN) indicator
Indicates that the current numerical display is of a track's remaining
time.
8. SRS indicator ( )
Lights when TruSurround function is selected. This function is disa-
bled in DJ mode.
9. Disc indicator ( )
Lights when showing CD TEXT or MP3 disc title display.
10. Minutes display (000-999 M)
11. Seconds display (00-59 S)
12. Frame display (00-74 F)
Display audio frame numbers. 75 frames are equivalent to one sec-
ond of normal play. Not displayed in NORMAL mode.
13. Video frame display (00-29 VIDEO F)
Lights during DVD playback in DJ mode. 30 frames are equivalent to
one second. Video frame display does not appear during CD play-
back and in NORMAL mode.
Since this unit controls video frames (1/30 second) based on the
audio frame (1/75 second), combining the two will result in a maxi-
mum deviation of 1 frame.
14. TEMPO indicator
Displays tempo variation produced when TEMPO control slider is
operated.
15. EJECT LOCK indicator
Lights when eject/stop mode select switch is set to LOCK position.
If the EJECT (0) button or STOP button is pressed when this indica-
tor is lighted, the indicator will flash for about 2 seconds.
16. Tempo control range display (±6, ±10, ±16, WIDE)
Lights to indicate the TEMPO control slider's variable range as se-
lected with the tempo control range select button. Does not light in
NORMAL mode.
17. Master tempo indicator (MT)
Lights when master tempo function is ON.
Does not light in NORMAL mode.
10
En <DRB1388>
2 3 4 5 6 7 8 9 10
21
11 12 13 14
20 19 18
18. BPM counter display
Lights to indicate the beats per minute (BPM) of the currently play-
ing track. Some tracks may not be measurable with the automatic
BPM counter.
Does not light in NORMAL mode.
19. Dot matrix display (50x7 dots)
Used for displaying various items, including TEXT, WAVE, guide, etc.
During CD TEXT display, shows up to 72 characters for disc title or
up to 48 characters for track title; for MP3, displays up to 48 charac-
ters (display scrolls when 9 or more characters are to be shown).
In the case of WAVE display, the varying volume levels of the cur-
rently playing track are displayed, with the track sized to fit into the
entire 50-dot display width.
For guide messages, see P.49 "Dot Matrix Guide Display Mes-
sages".
20. Play address display
Displays a bar graph to allow an immediate visual grasp of the elapsed
and remaining playing time of the currently playing track. The full
scale bar length indicates the full track length.
¶ The bar graph is off at the beginning of the track, and lights from
left to right.
¶ The bar graph is lighted at the beginning of the track, and goes out
from left to right.
¶ When the remaining playing time falls below 30 seconds, the bar
graph flashes slowly; when less than 15 seconds are left, the bar
graph flashes quickly.
21. Cue memory indicator (M.CUE)
The selected chapter or track's cue memory position is indicated by
the indicators beneath the play address display. Even if multiple
memory points are located within the same block, only a single indi-
cator lights. Does not light in NORMAL mode.
22. Loop memory indicator (M.LOOP)
Displays the loop memory position for the selected track immedi-
ately above the playback address display. Even if multiple memory
points are located within the same block, only a single indicator lights.
Does not light in NORMAL mode.
23. RELOOP indicator
Lights when loop-in points and loop-out points have been recorded
and loop playback is possible, as well as during loop play operation
itself.
Does not light in NORMAL mode.
24. EMERGENCY LOOP indicator
Lights during loop operation in emergency loop mode.
Does not light in NORMAL mode.
25. DTS indicator
Lights during playback when DTS audio has been selected.
Not supported in DJ mode.
26. GUI indicator
Lights when setup menu, image adjust, disc information and other
onscreen menus are displayed.
27. Dolby Digital indicator (2 D)
Lights during playback when Dolby Digital audio has been selected.
28. Disc type indicator (DVD/CD)
Lights to indicate the type of disc being played.
29. Reverse indicator (REV)
Lights to indicate the DIRECTION select switch is set to reverse
(REV) position.
Does not light in NORMAL mode.
15
17 16