Program Selection; Function Instruction - Danby DWM030WDB-6 Manual Del Propietário

OPERATING INSTRUCTIONS

PROGRAM SELECTION

Use the instructions below to choose the desired
program.
1. Press the program button to choose the wash
program.
• Heavy: For heavily soiled clothing.
• Gentle: For delicate clothing.
• Normal: For normally soiled clothing.
• Rapid: For small loads or lightly soiled
clothing.
• Soak: For stained clothing.
2. Press the water level button to choose the water
level.
• Large: For a full load.
• Medium: For a half load.
• Small: For a small load.
3. Press the wash button to choose the length of the
wash program, between 0 and 15 minutes.
4. The rinse cycle will run for 10 minutes. Press the
rinse button to choose how many times the rinse
cycle will run, between 0 and 4 times.
5. Press the spin button to choose the length of the
spin program, between 0 and 9 minutes.
6. Press the start/pause button to begin the wash
program. The estimated time remaining will
show on the display panel. The program can be
paused at any time by pressing this button.

FUNCTION INSTRUCTION

Prior to starting a new program, check the
following:
• The drain hose is in the correct position.
• There are no leaks in the inlet hose when the
faucet is turned on.
• The power cord is properly plugged into a three
prong grounded outlet.
• All coins and loose items have been removed
from clothing.
• Place clothing into the washing machine. Drop
items loosely into the tub. Do not pack items
tightly. Items must be able to move freely through
the wash water for best cleaning results.
• Follow the instructions to set the desired wash
program.
• Close the door and press the start/pause button
to begin the desired program.
• A wash program can be paused once it is in
operation by pressing the start/pause button.
• The appliance will not operate if the door is
open.
• When a program is fi nished, an alarm will
sound.
7