Program Selection; Delay Function; Mute Function; Automatic Power Off Function - Danby DWM045WDB Manual Del Propietário

OPERATING INSTRUCTIONS

PROGRAM SELECTION

Press the Program/Delay button repeatedly to
choose the desired program.
Consult the table below for information on program
times.
Note: Program times can vary based on the amount
of clothing in the washing machine and the water
pressure going into the inlet hose.
Program Cycle Name
Code
01 Auto Wash
02 Normal
03 Heavy
04 Quick
05 Soak
06 Delicate
07 Wash Only
08 Rinse and Spin
09 Spin Only
10 Super Spin
11 No Spin
• Press the Water Level button to choose the size
of wash load that will be completed.
• Press the Water Supply button to choose the
desired water temperature.
• Close the lid and press the Start/Pause button to
begin the desired program.
• A program can be paused once it is in
operation by pressing the Start/Pause button.
• If the load is unbalanced, and the safety switch
is triggered during spinning, the machine will
automatically refi ll with water to adjust the
balance.
• The appliance will not operate if the lid is open.
• When a program is fi nished, an alarm will
sound.
• To reduce the risk of electric shock and water
leaking, disconnect the water inlet hose and the
power cord when the appliance is not in use.

DELAY FUNCTION

Choose a program by pressing the Program/Delay
button. Press the Start/Pause button. The appliance
will chime for 3 seconds. While the appliance is
chiming, keep pressing the Program/Delay button
until the desired delay time is displayed.
For example, to delay the program for 5 hours,
press the Program/Delay button until the display
shows "05."
Max Cycle
Duration

MUTE FUNCTION

29 minutes
35 minutes To mute all sounds from the appliance, press the
Power button and the display will show "00," press
41 minutes
and hold the Start/Pause button for 1-2 seconds to
15 minutes
activate the mute function. To deactivate the mute
function, press the Start/Pause button.
61 minutes
41 minutes
14 minutes

AUTOMATIC POWER OFF FUNCTION

27 minutes
9 minutes
If the washing machine is turned on and no
program is selected within 10 minutes, the
32 minutes
appliance will automatically power off to conserve
32 minutes
energy.
Once a wash program is complete, a buzzer will
sound six times to alert that the program is fi nished
and the appliance will automatically power off to
conserve energy.
8