Basic Operations; Playing Discs - Aiwa NSX-V50 Manual De Instrucciones

A
F?
~
opEN/cLosE"
o
rDISC CHANGE
@
DISCDIRECT PLAY
BASIC OPERATIONS
LOADING DISCS + El
Press the CD button, then press the A OPEN/CLOSE
button to open the disc compartment. Load disc(s)
with the label side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate
the trays after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing the A OPEN/CLOSE
button.
DISPLAY
@ Total playing time of the selected disc
@ Disc tray number of a disc to be played
@ Total number of tracks on the selected disc
@ Music calendar (only the first 20 tracks are displayed)
PLAYING DISCS + III
Load discs.
@To play all discs in the disc compartment, press
the +b button.
Play begins with the disc on tray 1.
@To play one disc only, press one of the DISC
DIRECT PLAY buttons.
The selected disc is played once.
DISPLAY
@ Playing time of track
@ Number of track being played flashes.
@ Number of track being played
To stop play, press the button.
To pause play, press the II button. To resume play, press again.
To search for a particular point, keep the < or E button
pressed and release the button on the desired point.
To skip to the beginning of a track, press the * or * button
repeatedly.
To remove discs, press the A OPEN/CLOSE button.
To start play when the power is off (Direct Play Function)
Press the CD button. The power is turned on and play of the
loaded disc(s) begins.
To replace discs before play, press the 4 OPEN/CLOSE button
to open the disc compatiment.
To check the remaining time
Press the CD EDIT/CHECK button during play. The amount of
time remaining until all tracks finish playing is displayed. To
restore the play time display, repeat the above again.
To be continued.
24