_.-
..- --
.– --
CD GRAPHICS
(NSX-V51G
only)
~
opEN/cLosE
a!
DiRECTION/PRESET
b
On[v a TV with the VIDEO input iack can be connected to view
graphics.
Connect the VIDEO OUT jack of the unit to the video input
jack of the TV with the supplied connection cord ~.
PLAYING CD GRAPHICS DISCS
1 Turn on the TV and select the video input of TV.
2 Press the CD button.
3 Load the disc(s) on to the disc compartment.
4
Press the 4P button to start play.
Sound is heard from the speakers of this unit, and graphics
are shown on the TV.
To stop play, press the
button.
To
pause,
press the II button. To resume play, press again.
Usable disc
Use a disc with ~
or CDG marked on its jacket. Graphics
of other compact discs (CD-V, CD-1, VIDEO CD, etc.), are not
shown on the TV.
m
After searching for previous or succeeding points with the *
or W button, or after pause with the II button, an unusual image
may be displayed on the TV, This does not indicate a malfunction.
In this case, press the
button to stop play and then start again.
Color format setting
The color format of the video image from the unit is factory-set
to PAL. This can be changed to NTSC if necessary.
Press the POWER button while pressing the CD button.
To restore, carry out this procedure again.
If the color format setting does not match the TV, the video
image may distort vertically or deteriorate on the TV.
Formats other than NTSC or PAL, for example NTSC 4.43 or
SECAM, etc., are not applicable for this unit.
30