Yamaha CDR-HD1000 Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 332
1
NATURAL SOUND
HDD/CD RECORDER
CDR–HD1000
POWER
HDD
CDR
COPY
PHONES
LEVEL
MIN
MAX
<Starting to duplicate>
1.
Press COPY three times.
The following message appears on the display, and this unit
enters the copy standby mode. Duplication has not been started
yet at this stage.
D u p l i c a t e
DUPLCT
ALL SYNC
1 π 1
DUPLCT
ALL SYNC
2.
Start copying from the CD onto the HDD.
Press w/d (w on the remote control) to start copying. The
copying conditions are as follows:
• Copy Method: "Digital Copy"
• Copy Level:
0dB
• Copy Speed:
"Best Effort"
See page 30 for further details about the copying conditions
described above.
Cautions
• If copying is canceled by a being pressed, even the data that
has been copied before cancellation does not remain on the
HDD.
• If a track is copy protected by the SCMS standard, that track
cannot be copied onto the HDD.
3.
When copying from the CD onto the HDD has been
completed, the following message appears on the
display.
C h a n g e D i s c s !
DUPLCT
ALL SYNC
4.
Press v (OPEN/CLOSE on the remote control) to
open the disc tray.
5.
Load a new CD-R or CD-RW disc on the disc tray.
Caution
• New recordings cannot be added to a CD-R or CD-RW disc on
which some tracks have been previously recorded.
5
4, 6
TEXT/TIME
TRACK NO.
BOOKMARK
REC
FINALIZE
ERASE
REC
DIG
L
TOC
dB
–30 –10
–6
–2
0
CD
R
0 0 0
REC
DIG
L
TOC
dB
–30 –10
–6
–2
0
CD
R
REC
L
DIG
TOC
dB
–30 –10
–6
–2
0
CD
R
2
4, 6
1
MULTI JOG
PUSH ENTER
MODE/SET
MENU
COMPLETE
CLEAR
DIGITAL REC LEVEL
INPUT
ANALOG REC LEVEL
OPTICAL
COAXIAL
ANALOG
MIN
MAX
6.
Press v (OPEN/CLOSE on the remote control) to
close the disc tray.
When the disc tray is closed, this unit starts reading the disc
information. When reading has been completed, this unit
automatically starts copying from the HDD onto the CD.
DUPLCT
Notes
• Duplication cannot be correctly made for a CD-R or CD-RW
disc that does not support high-speed copying. In this case,
make a copy onto the HDD first, and then copy the copied
data onto a disc by "Digital Move" at 2x or 1x speed. (See
page 30.)
• After reading the disc information has been completed, OPC
may start on the loaded disc depending on its recording
condition.
O P C A d j u s t
When the adjustment has been completed, and the above
message turns off on the display, this unit automatically starts
copying. The copying conditions are as follows:
• Copy Method: "Digital Move"
• Copy Level:
0dB
• Copy Speed:
"Best Effort"
See page 30 for further details about the copying conditions
described above.
Caution
• If copying is canceled by a being pressed, only the data that
has been recorded on the CD-R or CD-RW disc before
cancellation remains on the disc. The original data on the
HDD being copied will be deleted.
7.
When copying has been completed, the HDD
operation automatically stops, and finalization of the
CD-R or CD-RW disc starts.
F i n a l i z i n g
After finalization has been completed, this unit enters the stop
mode.
BASIC COPYING OPERATION
OPEN/CLOSE
2
COPY
REC
HDD
TRACK NO.
FINALIZE
ERASE
WRITE
TEXT/TIME
INPUT
MODE/SET
MENU
COMPLETE
CLEAR
ENTER
1 " 1
0 0 1
REC
DIG
L
dB
–30 –10
–6
–2
0
CD–RW
ALL SYNC
R
REC
L
GROUP
dB
–30 –10
–6
–2
0
CD–RW
R
REC
GROUP
CD–R
CDR
27
E-

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido