Yamaha CDR-HD1000 Manual De Instrucciones página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 332
ADVANCED COPYING OPERATION
4.
Adjust the parameter for each item by rotating the
MULTI JOG knob (pressing +/– on the remote
control).
See the further steps for detailed instructions on parameter
adjustment for each item.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6.
Press MENU to close the menu.
This unit returns to the copy standby mode.
Note
• The settings for "Copy Method" and "Copy Speed" are stored in
the memory and apply to future copying.
I Copy Method
Setting of the copying method. Copying may fail if the setting for
"Copy Method" is not correctly made.
<When copying from a CD onto the HDD>
Initial setting: Digital Copy
Digital Copy
This method always makes digital copies. Copying is not
possible if the tracks are copy protected by the SCMS standard
(see page 11).
Auto Dig/Anlg
Digital and analog copying are automatically switched
depending on the track. If digital copying is prohibited by the
SCMS standard (see page 11), an analog copy is made. For
those tracks that can be digitally copied, a digital copy is made.
Analog Copy
This method always makes analog copies.
<Copying from the HDD onto a CD-R or CD-RW disc>
Initial setting: Analog Copy
Analog Copy
This method always makes analog copies.
Digital Move
The data is moved from the HDD to the CD. Therefore, the
track or group data will be deleted from the HDD after they
have been moved to the CD-R or CD-RW disc by this method.
Auto Dig/Anlg
Digital and analog copying are automatically switched
depending on the track. If digital copying is prohibited by the
SCMS standard (see page 11), an analog copy is made. For
those tracks that can be digitally copied, a digital copy is made.
Note
• In analog copying, the data may be copied at a lower sound level.
30
E-
I Copy Level
Setting of the sound level for copying. Sound level adjustment is
not normally necessary. However it is possible to adjust the copying
sound level to suit you needs.
The following message appears on the display when "Copy Level"
setting is confirmed in step 3 for "Copying Menu Setting" on page
29.
L e v e l
1.
Adjust the copying sound level by rotating the MULTI
JOG knob (pressing +/– on the remote control).
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps. When the level is set to a value other than 0dB, the VAR
indicator lights on the display.
L
dB
–30 –10
–6
R
2.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the copying level setting.
Notes
• Level adjustment is not possible during copying.
• If the red part on the peak level meter lights at the loudest sound
levels, stop copying to adjust the copying level, and then resume
copying.
L
dB
–30 –10
–6
R
I Copy Speed
Setting of the copying speed.
Initial setting: Best Effort
Best Effort
Copying is done at the highest speed possible depending on the
"Copy Method" setting and the disc condition.
• When "Digital Copy" is selected: 10x speed
• When "Auto Dig/Anlg" is selected: 2x speed
• When "Digital Move" is selected: 8x speed (for a CD-R disc),
4x speed (for a CD-RW disc)
• When "Analog Copy" is selected: 2x speed
1x Copy
Copying is always made at 1x speed despite the "Copy
Method" setting.
2x Copy
Copying is always made at 2x speed despite the "Copy
Method" setting.
Notes
• If there are scratches or dust on the disc, the copy speed may drop
automatically even when "Best Effort" is selected.
• Select "2x Copy" or "1x Copy" when copying onto a CD-R or
CD-RW disc that does not support high-speed copying.
0 . 0 d B
REC
L
dB
–30 –10
–6
–2
0
R
GROUP
–2
0
CD–RW
VAR
GROUP
–2
0
CD–RW
VAR

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido