Adjustment And Programming; Control Panel - Fondital eBLITZ GD Serie Manual De Instalación, Uso Y Mantenimiento

5. Position the radiator by leaning it on the upper part of the brackets and then rotating it.
Push the radiator until it is automatically locked by lower plastic clamps.
The operation is over only when locking hooks are blocked and the radiator is fixed on the
wall, without any possibility of movement.
In any case the minimum distance of the radiator from the floor must be 120 mm.
6. If necessary, remove the radiator and operate on the lower plastic clamps by moving them
horizontally and then rotating them.

4. ADJUSTMENT AND PROGRAMMING

4.1. CONTROL PANEL:

The appliance is equipped with five keys, as shown in the figure.
- : decrement key
Programming key: key
to enter in programming
mode
EN
+ : increment key
Function key: selection of
operating modes
Standby: key dedicated
exclusively to manage
standby state
27