Inepro MicroTimer 2400 Manual De Uso página 12

Introduction
®
The MicroTimer standard control board design includes a minimum of functionality. The functionality of the
®
MicroTimer can be expanded by means of additional "ECOS"
produce perfectly customised MicroTimers
connected device over a certain programmable length of time. This MicroTimer
optimised way by means of three control keys. With its potted electronics and its extensibility by means of
®
"ECOS" software modules the MicroTimer
®
"ECOS" : Electronic Customised Option System
Read this manual carefully to guarantee faultless operation.
Design
* Very resistant plastic housing
* Suitable for internal and external installation
* Three keys: Start/Pause, Timer & Stop (internal and external)
* Bright green 2-digit LED display
* Extensibility by means of ECOS software modules
* Supply voltage either 24 Volt or 240 Volt
Versions
There is one type of MicroTimer
additional software modules and the settings.
®
. MicroTimer
®
is a very special timer of its kind.
®
available as the functioning of the MicroTimer
®
MicroTimer 2400 Version 4.0 05-11-2007
- www.inepro.com
®
software modules. Thus, it is possible to
®
outputs have two neutral relay points to control a
®
®
mainly depends on the
-
is programmed in a user-
12