Manual Operation; Remote Maneuvering; Remote Control Maneuvering With Can Cable Connected - Husqvarna PG820 RC Manual De Instrucciones

Manual operation

When maneuvering manually, the wheel motors should
be disengaged from the wheels and the remote control
can be docked on the handle.
• Fix the remote control on the handle.
• Pull out and turn the spring-loaded locking pin on
each wheel to disengage the wheel motors.
Recommended working position of the machine.
24 – English
OPERATING

Remote maneuvering

The machine is maneuvered wirelessly with radio
communication between the machine and the remote
control. For more information, please see the 'Remote
control' section.
!
Recommended working position for the machine when
maneuvering with remote control.
Remote control maneuvering with CAN
cable connected
The machine can also be maneuvered via the remote
control with the CAN cable connected between the
remote control and the machine. Can be used when the
remote control battery is flat.
Recommended working position for the machine when
maneuvering with remote control.
CAUTION! Make sure the locking pins on
the wheel to the wheel motors are
depressed (locked position).