Storage; Long-Term Storage Of Battery - Husqvarna PG820 RC Manual De Instrucciones

Transport
The machine battery should only be used for remote
control of the machine between the mode of transport and
the work area.
WARNING! Take great care when
!
operating the floor grinder up and down
ramps (max. 17° ° ° ° incline). For steep
ramps, always use a winch. Never stand
behind the machine.
Avoid moving uphill or up a ramp when
the remote control indicates low battery
as the machine could suddenly power
down.
REV FWD
0
SPEED
0
POWER
0
• To go down a ramp, drive the machine backwards
slowly.
• To go up a ramp, drive the machine forward slowly.
Lift the machine
• When lifting the machine there is a risk of injuring
persons or damaging the machine or the
surroundings. Define the risk area and check that
nobody is present within the area when lifting.
• Always use the lifting eyes on the machine when
lifting.
32 – English
OPERATING
Jan 05 12:45
REV FWD
0
SPEED
0
POWER
Transport the machine on a means of
transport
CAUTION! The grinding unit should rest
!
on the surface and always have the tool
plate empty of tools to protect the
locking mechanism when transporting.
Do not use the support wheel and frame
for anchoring.
• Raise the support wheel as much as possible so that
the grinding unit is resting on the surface. The support
wheel can be swung up to take less room. Anchor the
machine so that it will not make involuntary
movements.

Storage

• Raise the support wheel as much as possible so that
the grinding unit is resting on the surface. The support
wheel can be swung up to take less room.
• Ensure the machine is cleaned and that a complete
service is carried out before long-term storage. For
more information, see the "Maintenance and service"
section.

Long-term storage of battery

• Maintenance charge the machine battery ever 6
months in long-term storage.
• The remote control battery should be removed from
the remote when storing for longer than 6 months.