Wipe Protection; Switching On; Switching Off; Energy Consumption Indicator - Siemens iQ500 ET475FYB1E Instrucciones De Uso

Wipe protection

en
kWipe protection
I f you wipe over the control panel while the appliance is
W i p e p r o t e c t i o n
switched on, settings may be altered.
To prevent this from happening, your appliance has a
wipe protection function.

Switching on

Touch the symbol when the appliance is switched on.
„
An audible signal sounds. The
The control panel is locked for 30 seconds. You can
now wipe over the control panel without altering any
settings.
The main switch is excluded from the wipe
Note:
protection function. You can switch off the appliance at
any time.

Switching off

Touch the symbol.
„
The wipe protection function is switched off.
12
indicator lights up.
Ñ
[Energy consumption
indicator
Y ou can use this function to display the total energy
E n e r g y c o n s u m p t i o n i n d i c a t o r
consumption between switching the appliance on and
off.
Once switched off, the energy consumption in kilowatt
hours (e.g. 1.87 kWh) is displayed for 10 seconds.
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The energy consumption display may not be
activated.~ "Basic settings" on page 13