Operating the appliance
en
1Operating the appliance
I n this section, you can find out how to set your
O p e r a t i n g t h e a p p l i a n c e
appliance. In the table, you can find the settings for
various dishes.
Switching on or off
The appliance switches off automatically when
Note:
the temperature setting remains at 0 for more than
20 seconds.
Switching on
Touch the
symbol.
#
An audible signal sounds. The indicator above the main
switch lights up. The appliance is ready to use.
Switching off
Touch the
symbol until the indicator above the main
#
switch goes out.
The appliance is switched off. The residual heat
indicator remains lit until the appliance has cooled
down sufficiently.
Setting the temperature
Switch on the appliance with the main switch.
1.
lights up on the temperature display.
‹‹‹
Slide your finger along the control panel until the
2.
required temperature appears on the display.
The heating indicator flashes.
Once the set temperature has been reached, an audible
signal sounds and the heating indicator goes out. Now
you can place the food onto the teppanyaki.
The appliance regulates the temperature by
Note:
switching the heat on and off. The heat may switch on
and off even at the highest setting.
Keep warm setting
The Teppan Yaki must be switched on.
Select the keep warm setting
Do not try to keep too much food warm at once. All
food to be kept warm should be in contact with the
grilling surface, as otherwise it will cool down. Do not
keep food warm for too long as it will dry out.
8
in the settings range.
f
Cleaning level
At the
cleaning setting, the appliance heats to
...
40 °C. This enables you to leave the dirt to soak once
you have poured a little water and added a drop of
washing-up liquid on the frying surface (1 hour
maximum). You can begin cleaning once the dirt has
begun to soften.
Switching off the rear heating zone
If you are preparing small amounts of food, you can
also just use the front heating zone. You can use the
rear heating zone for keeping food warm.
Switch on the appliance.
1.
Touch the
symbol.
ù
2.
The display above the symbol lights up. The rear
heating zone is switched off.
The next time you switch the appliance on, this
Note:
setting will be retained. You can change this behaviour
in the basic settings.