Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
58
INSPECTION AND MAINTENANCE
ENOM00096-C
Fuel filter (for fuel tank)
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclockwise
2. Clean the fuel filter and check the O-
ring. Replace it if necessary.
3. Reassemble all parts.
1
1. Fuel pick up
2. Filter
ENOM00098-A
Gear oil replacement
10
ENOW00094-0
Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted
up and locked, or accidental fall of out-
2
ENOF00926-0
WARNING
board motor could lead to severe per-
sonal injury.
ENON00934-0
Note
Please dispose of used oil in a manner that
is compatible with the environment.
We suggest you take it in a sealed container
to your local service station for reclamation.
Do not throw it in the trash, pour it on the
ground or down a drain.
1. Tilt down the outboard motor.
2. Remove the oil plugs (lower and
upper), and completely drain the gear
oil into a pan.
3. Insert the oil tube nozzle into the lower
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole and bubbles is
disappeared to remove the air.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume: approx. 360 mL (12.2
fl.Oz).
ENOF01133-0
Publicidad
Capítulos
Tabla de contenido
