Complete The Installation; Description Of The Hood; Control - ELICA EPT430S2 Guía De Instalación, Uso Y Mantenimiento

Complete Installation
• For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter.
See the "Mainteinance" section.
• Install metal filters. See the "Mainteinance" section.
To get the most efficient use from your new range hood, read
the "maintenance" section.
Keep your Use, Care, and installation Guide close to range
hood for easy reference.

Description of the Hood

6
1
2
5
1.
Blower and light controls
2.
LED lamps
3.
Grease filter handle
4. Grease filter
5.
Canopy
6.
Duct covers
3
4

Control

1.
Light On/Off button
2.
Blower On/Off button
3.
Blower speed minimum button
4.
Blower speed medium button
5.
Blower speed maximum button
NOTE: Control buttons will light up when range hood is On.
Operating the light
The Light On/Off button (1) controls both lights. Press once
for On and again for Off.
Operating the blower
The Blower On/Off button (2) turns the blower On or Off.
The Blower Speed buttons (3, 4 and 5) set the desired speed
and control the sound level for quiet operation. The speed
can be changed anytime during fan operation by pressing the
desired blower speed button.
1 To turn the blower On, press the Blower On/Off button (2)
and the desired speed button (3, 4 or 5).
2 To turn the blower Off, press the Blower On/Off button (2).
Any of the 3 blower speed buttons can be in the On position
at the same time. The blower will operate at the highest speed
button that is pushed in. For lower blower speeds, the higher
speed buttons must not be pushed in.
9