Starrett S7010 Manual De Instruccion página 106

CUTTING PROCESS:
1. Before starting the machine, TOUCH the Shoe Plate on the material to
be cut;
2. APPROACH teeth of the Blade in the edge of the material to be cut, but
slightly away;
3. ON the machine and ALLOW the blade to reach full speed;
4. DO NOT START cutting until the machine reaches the full speed;
5. Firmly holding the machine, LEAD slowly the machine forward with both
hands, keeping the Shoe Plate properly pressed on the surface of the material
to be cut (fi gure 09);
6. When fi nished cutting, TURN OFF the machine and immediately NOT
TOUCH the cutting tool.
WARNING: USE just enough pressure to keep the cutting blade.
DO NOT FORCE the cutting and ALLOW the cutting tool do his work.
CAUTION:
106 S7010
Before starting the cutting process, the user
should be familiar and know all the features,
settings and machine safety recommendations.
ENGLISH