CAUTION:
VARIABLE SPEED (spm):
The Jig Saw has the feature to vary the blade cutting speed, measured in
spm (stroke per minute).According to the pressure on the Trigger Switch,
proportionally greater will be this speed. To decrease the speed just remove
the pressure on the Trigger Switch.
WARNING: USE variable speed feature only for a short period of time.
DO NOT OPERATE the machine continuously at different speeds. This can
ELECTRICAL BRAKE:
To STOP the shaft of the Jig Saw, RELEASE the Trigger Switch and ALLOW it
to come to a complete stop. The Electric Brake will engage and act quickly
and automatically when released the Trigger Switch.
WORK LAMP:
The Work Lamp - LED is located on the front of the housing above the
cutting tool (fi gure 04). When the Trigger Switch is pressed this Lamp lights.
This provides light on the surface of the workpiece to operation in low light
areas. When removing the pressure on the Trigger Switch the lamp will be
turn off.
PRESS the Trigger Switch only when the adjustable
Shoe Plate is fi rmly positioned on the material to be
cut. Risk of accidents!
damage the Trigger Switch.
ENGLISH
S7010 99