Starrett S7010 Manual De Instruccion página 92

ENGLISH
13. DO NOT TOUCH the Blade after the operation, avoiding burns because
the heating of it;
14. NEVER PUT hand under the material to be cut. NEVER USE hands to
remove sawdust, chips or waste close to the cutting tool. REMOVE the
machine closely to MAKE the cleaning of work area, without the aid of
compressed air but with safety glasses;
15. Wipers, rags, cord, wire and other should NEVER be left around the
work area;
16. AVOID cutting nail fasteners.INSPECT advance the material to be cut
and REMOVE all nails and other foreign objects before starting the cutting
operation;
17. DO NOT TRY, under any circumstances, the removal of the cutting tool
of the machine in operation;
18. If user is interrupted during the cutting operation, the proper procedure
is CONCLUDE the operation and TURN OFF the machine, before loss of the
attention;
19. Periodically CHECK the condition and integrity of the machine and
parts, as their accessories.CHECK if the accessories are properly adjusted;
20. DO NOT STORE materials or equipment over the machine because
these can fall inside it.
92 S7010