Programme For Positioning The Weights Behind The Spokes "Hidden Weight" (Only With Alu 1P And Alu 2P Programmes) - SICE S 63 E Manual De Instrucciones

"Shift planes" programme (only with ALU P programmes)
This function is automatically enabled when an ALU P programme is selected.
It modifies the former selected positions for the application of adhesive balancing
weights, in order to allow perfect wheel balancing using commercially available adhesive
weights in multiples of five grams.
The accuracy of the machine is thereby improved, avoiding rounding-off or cutting the
weights to be applied to come closer to the actual unbalance values.
10. PROGRAMME FOR POSITIONING THE
WEIGHTS BEHIND THE SPOKES "HIDDEN
WEIGHT" (ONLY WITH ALU 1P AND ALU 2P
For alloy wheels, use the Hidden Weight programme in conjunction with the ALU 1P or ALU
2P programme to conceal the external weight behind two spokes for aesthetic reasons.
The Hidden Weight programme can only be activated if there is an unbalance on the outer
side.
This programme divides the outer weight Pe into two weights P1 and P2 located in any
position chosen by the operator. The only condition is that the two weights must be within
an angle of 120° (including the weight Pe), as shown in fig. 25.
Figure 25. Conditions necessary for using the Hidden weights programme
To use this programme, proceed as follows:
1 Turn the wheel until the central element of the corresponding position indicator lights
up
It is recommended to keep the wheel in position using the pedal brake.
2 Press the
110
PROGRAMMES)
key to activate the programme.
S 63 E - S 63 E C Operator's Manual