General Conditions Of Use - SICE S 63 E Manual De Instrucciones

GENERAL CONDITIONS OF USE

The equipment is intended for professional use only.
CAUTION
Only one operator at a time can work with the machine.
The wheel balancers described in this manual must be used exclusively to measure the
extent and position of car wheel unbalances, within the limits specified in the Technical
specification section. Furthermore, models equipped with motors must be provided
with a suitable guard, fitted with a safety device, which must be lowered during the spin
operation.
CAUTION
Any use of the machine other than the described use is to be considered as improper
and unreasonable.
WARNING
Do not start the machine without the wheel locking equipment.
CAUTION
Do not use the machine without the guard and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.
CAUTION
When working, never use equipment not manufactured by the manufacturer.
CAUTION
Get to know your machine: The best way to prevent accidents and obtain top perfor-
mance from the machine is to ensure that all operators know how the machine works.
Learn the function and location of all the controls.
Carefully check that all controls on the machine are working properly.
To prevent accidents and personal injury, all the equipment must be correctly installed,
correctly operated and correctly serviced.
In fig. 9b are the positions occupied by the operator during the various work phases:
A Mounting / disassembling operations, launch, dimension detection (where provided)
and wheel balancing
B Machine programs selection
In this way, the operator is able to perform, monitor and verify the outcome of each wheel
balancing and intervene in case of unforeseen events.
88
POSITION OF THE OPERATOR
S 63 E - S 63 E C Operator's Manual