Publicidad
Cause:
Remedy:
5. Machine feeds irregularly or not at all
Lint has accumulated between tooth
Remove needle plate and clean out lint.
rows of feed dog.
Feed dog dropped. (Drop-feed control is
Flick drop-feed control to the left or to
at right or at rear.)
the front.
6. Machine runs with difficulty
Thread ends in hook raceway.
Remove thread ends and put a drop of
oil into hook raceway.
7. Important notes:
Never run a threaded machine unless there is a piece of fabric under the sewing
foot. If you have to leave the machine, even for a short while, be sure to switch off
the master switch. This is particularly important when children are around.
55
Publicidad
