Applique - JUKI HZL-G220 Manual De Instrucciones

Applique

Attention
To make the stitch unconspicuous, an applique can be sewn.
1
2
Pattern paper
3
4
40
Pattern No.
Presser foot
Turn OFF the power switch before replacing the presser foot.
Seam allowance
Basting
Practical 05
Manual buttonhole presser foot (I)
Cut the applique fabric with seam allowance of 3 to 5mm.
Put the pattern paper onto the wrong side of the fabric and
fold the seam allowance at the finish line.
Put the applique fabric on the base fabric. Temporarily fix it
with basting stitches or glue.
Turn the hand wheel towards you and start sewing along with
the outer side of the applique fabric.
When you start sewing, the machine will automatically sew 3 lock stitches.
* When sewing steep angles, keep the needle inside the fabric, raise the
presser foot, change sewing direction and sew slowly.
Lock stitch at the end of sewing.
Push the reverse stitch button and the machine will automatically sew
3 lock stitches. It is better to lock stitch at the outer side of the applique
fabric.
* Usually center needle position is used for appliqué stitches but
right or left needle position can be used.
Changing needle position: Refer to page 24