Adjusting The Door; Three Wire Connection - Gaggenau BOP 250 612 Instrucciones De Instalación

en-us
Preparing Kitchen Units
4.
Center the appliance and fix to cabinet with lower
screws. Then fit both top screws. Remove the
transportation lock from the door.
NOTICE
Use a suitable screwdriver. Be careful not to scratch
the faceplate!

Adjusting the door

For precise alignment, the appliance door can be slightly
adjusted.
8
To align the door:
1.
Open the door and slightly loosen both screws at the
lower door hinge.
2.
Align the door.
3.
Tighten both screws again.
Note: The device door is already aligned when the
appliance is delivered. You do not normally need to align
the door.

Three wire connection

1.
Connect red wire from oven to red electrical supply
wire (hot wire).
2.
Connect black wire from oven to black electrical
supply wire (hot wire).