Adjusting The Door - Gaggenau BS 464 610 Instrucciones De Instalación

4 Screw the appliance into place. Remove
transportation lock from the door.

Adjusting the door

For precise alignment, the appliance door can be easily
adjusted.
8
For this purpose, slightly pull out the appliance from the
built-in cut-out. At the top of the appliance there is an
oval opening located on the hinge side. Remove the
cover cap. Slightly loosen both screws (Inbus 5 mm),
but do not remove them!
Align the door via the lateral screw (Torx 20).
Tighten both screws (Inbus 5 mm) again. Attach the
cover cap again.
Notes
‒ The alignment of the appliance door can be
adjusted via the upper hinge, in order to achieve a