General Information - caprari MEC-A Serie Instrucciones De Servicio

MEC-A / MEC-MR / MEC-MG / HM / HMU / BHR
If the pump is supplied by caprari without a motor:
- comply with the specifications given in the "Motor table" in chapter 11 "Technical data" if an electric
motor is used;
- comply with the assembly specifications in paragraph 5.3 "Mechanical connections";
GB
- it is forbidden to set the assembled machine at work before it has been declared as conforming to the
pertinent Directives
INDEX
1 -

General information

2 - Safety
3 - Description of the product and use
4 - Storage and handling
5 - Assembly and installation
6 - Use and management
7 - Dismantling and disposal
8 - Warranty
9 - Troubleshooting
10 - Nomenclature / Typical sections
11 - Technical data
12 - Dimensions and weights
Declaration of conformity (removable)
Caprari, dealer and/or after-sales service center reference
1. GENERAL INFORMATION
1.1 Use of symbols
The instructions in this manual concerning safety are marked by this symbol. Failure to comply with these instructions
could expose personnel to health risks.
The instructions in this manual concerning electrical hazards are marked by this symbol. Failure to comply with these
instructions could expose personnel to risks of an electrical nature.
ATTENTION Instructions preceded by this word concern the main recommendations for correct installation, operation, preservation
and disposal of the product itself. To ensure safe and reliable management of the product throughout its working life it
is, however,
Read the use and maintenance manual.
Take care of rotating parts.
1.2 General information:
Make sure that the items indicated on the consignment note correspond to those actually received and that these have not been damaged.
Before working on the purchased unit, please become fully familiar with all the instructions given in the supplied documentation.
The manual and all the supplied documents form an integral part of the product. They should be kept with care and be available for consultation for as
long as the product is in use.
No part of these documents may be duplicated in any form unless prior written authorization has been obtained from the manufacturer.
1.3 Example of a pump data plate
TYPE Code
Ratio -
Q [l/s] [m 3 /h] Nominal flow rate
H max [m] Maximum head
1.4 Example of a motor data plate
TYPE Code
N° Date Code and/or Serial N° and/or Customer's Serial N°
l [A] Rated amperage draw
P [kW][HP] Rated power delivery
2
cosϕ Power factor
IP54 Motor protection degree
12
GB
essential to comply with all the instructions in this manual.
N°
n [min-1]
H [m]
ENGLISH
page 12
page 14
page 14
page 15
page 15
page 17
page 19
page 19
page 20
page 52
page 54
page 57
Data Code and/or Serial N° and/or Customer's Serial N° and/or Job N°
Rpm rate
Nominal head
Rotation direction
U [V] Rated powering voltage
~
Alternating current
f [Hz] Frequency
n [min-1] Rpm rate
S1 Continuous service
I. Cl. Insulation class
Caprari S.p.A.